Tire and Wheel Tools
OCT 06-2436 - 43/64 WHEEL STUD DRILL BIT
43/64" bit is correct for drilling hubs or axle flanges to accept most 5/8" wheel studs with .690" knurl diameter. 1/2" shank.
43/64" bit is correct for drilling hubs or axle flanges to accept most 5/8" wheel studs with .690" knurl diameter. 1/2" shank.
OCT 06-4250 - STAGGER GAUGE
This measures the tire diameter and automatically converts it to circumference. Strong tubular construction will not flex. Gives accurate and consistent stagger measurements every time. Measures Stagger from 65" to 115" in 1/4" increments
This measures the tire diameter and automatically converts it to circumference. Strong tubular construction will not flex. Gives accurate and consistent stagger measurements every time. Measures Stagger from 65" to 115" in 1/4" increments
OCT 06-5000 - Digital Spring Smasher
All spring smashers/pull-bar raters are 120v, 4,000 lb. capacity, digital load, smart stop and powder coated.
All spring smashers/pull-bar raters are 120v, 4,000 lb. capacity, digital load, smart stop and powder coated.
OCT 06-6350 - E-Z BEAD BREAKER
Durable Steel Construction with Rubber Hand Grips. Works well with soft side wall tires. For use with 15" wheels
Durable Steel Construction with Rubber Hand Grips. Works well with soft side wall tires. For use with 15" wheels
OCT 06-7405 - PIT SOCKET WITH EXTENSION 5"
1/2" Drive 1" lug socket that features a 5" extension for deep wheels and off-sets.
1/2" Drive 1" lug socket that features a 5" extension for deep wheels and off-sets.
OCT 06-7412 - PIT SOCKET WITH EXTENSION 12"
1/2" Drive 1" lug socket that features a 12" extension for deep wheels and off-sets.
1/2" Drive 1" lug socket that features a 12" extension for deep wheels and off-sets.
OCT 07-4000 - MANUAL TIRE PREP STATION
Has swivel mount. Can be used with Wide 5, 5x5, 5x4.75 and 5x4.5 bolt patterns. Rotates freely in both directions and also has a manual lockout.
Has swivel mount. Can be used with Wide 5, 5x5, 5x4.75 and 5x4.5 bolt patterns. Rotates freely in both directions and also has a manual lockout.
OCT 07-4001 - ROLLING TIRE WORK STATION FITS WIDE 5, 5 X 5, 5 X 4 3/4 AND MOD LITE
The Octane Rolling Tire Prep Station has it all! The laser cut wheel mounting flange has multiple bolt patterns to choose from. The patterns that are buit in to this machine are Wide 5 , 5 x 5", 5 x 4 3/4" and 4 bolt Mod Lite Pattern.
This stand has great features such as a rear laser cut hanging plate for your buffer/grinder also a lug nut holder to keep your 3 mounting lug nuts on with a clip to secure them to the machine so they are always close by.
The stand also incorporates a built in adjustable rotating lock to allow the wheel and tire to remain stationary as well as being able to rotate clockwise or counter clockwise.
Also built in is a shrink wrap holder which will allow you to easly wrap and preserve your tires.
This unit also easily breaks down to allow for smaller foot print for storage while you are not using this unit.
The Octane Rolling Tire Prep Station has it all! The laser cut wheel mounting flange has multiple bolt patterns to choose from. The patterns that are buit in to this machine are Wide 5 , 5 x 5", 5 x 4 3/4" and 4 bolt Mod Lite Pattern.
This stand has great features such as a rear laser cut hanging plate for your buffer/grinder also a lug nut holder to keep your 3 mounting lug nuts on with a clip to secure them to the machine so they are always close by.
The stand also incorporates a built in adjustable rotating lock to allow the wheel and tire to remain stationary as well as being able to rotate clockwise or counter clockwise.
Also built in is a shrink wrap holder which will allow you to easly wrap and preserve your tires.
This unit also easily breaks down to allow for smaller foot print for storage while you are not using this unit.
OCT 07-4020 - BILLET TIRE SIPER
Equipped with 6 heavy Duty Blades. Siping depth can be precisely adjusted.
Equipped with 6 heavy Duty Blades. Siping depth can be precisely adjusted.
OCT 07-4050 - 8 SIPE MULTI-SIPER HEAD
Converts your hand held electric 2 groove siper into an 8 groove siper. Fits all pistol grip electric tire groovers
NOTE: Blades purchased separately.
Converts your hand held electric 2 groove siper into an 8 groove siper. Fits all pistol grip electric tire groovers
NOTE: Blades purchased separately.
OCT 07-4051 - MULTI SIPER BLADES
Replacement Blades (6 strips, each containing 6 blades for a total of 36 individual blades.)
Replacement Blades (6 strips, each containing 6 blades for a total of 36 individual blades.)
OCT 07-7000 - RIM WRENCH
Heavy-duty, used to straighten out the outter lips of wheels after contact.
Heavy-duty, used to straighten out the outter lips of wheels after contact.